MEASUREMENT SYSTEM ASSESSMENT

MAIN CONCEPT OF MEASUREMENT SYSTEM  0/6

• Lecture1.1
  Introduction, Purpose and Terminology
• Lecture1.2
  Quality of Measurement Data
• Lecture1.3
  The Measurement Process
• Lecture1.4
  Statistical Properties of Measurement Systems
• Lecture1.5
  Standards: Background and Use of Standards
• Lecture1.6
  Purpose of Calibration & Calibration Systems

TYPES OF MEASUREMENT SYSTEM VARIATION  0/6

• Lecture2.1
  Source of Variations
• Lecture2.2
  Bias
• Lecture2.3
  Repeatability
• Lecture2.4
  Reproducibility
• Lecture2.5
  Stability
• Lecture2.6
  Linearity

COMPUTATION TECHNIQUES ASSOCIATED WITH GR&R  0/0

ANALYSIS OF A MEASUREMENT SYSTEM  0/4

• Lecture4.1
  Measurement System Discrimination
• Lecture4.2
  Process Variation – Location
• Lecture4.3
  Process Variation – Width or Spread
• Lecture4.4
  Analysis of Measurement System’s Variability using Work Examples: Bias / Repeatability / Reproducibility / Stability / Linearity

EFFECTS OF MEASUREMENT SYSTEM VARIABILITY  0/7

• Lecture5.1
  Effect on Decisions
• Lecture5.2
  Effect on Product Decisions
• Lecture5.3
  Effect on Process Decisions
• Lecture5.4
  New Product Acceptance
• Lecture5.5
  New Process Acceptance
• Lecture5.6
  Process setup and control
• Lecture5.7
  Effectiveness in establishing QC / QA Systems

ASSESSING MEASUREMENT SYSTEMS  0/2

• Lecture6.1
  Selecting and Developing Test Procedures
• Lecture6.2
  Preparation for a Measurement System Study

VARIABLE MEASUREMENT SYSTEM STUDY  0/1

• Lecture7.1
  Guidelines for Determining Repeatability and Reproducibility: Range Method, Average and Range Method, Standard GR&R Study, Analysis of Variance (ANOVA) Method.

ATTRIBUTE MEASUREMENT SYSTEM STUDY  0/3

• Lecture8.1
  Attribute Gage Study
• Lecture8.2
  Visual Inspection: Based on “Correct Decision” – Effectiveness / Miss Rate / False Alarm Rate.
• Lecture8.3
  Visual Standard: Based on Inter-raters Agreement – Cohen’s Kappa Value

METHOD OF REDUCING UNACCEPTABLE GR&R RESULT  0/0

IMPACT OF GR&R ON PROCESS CAPABILITY STUDIES  0/3

• Lecture10.1
  Determination of Calibration Interval
• Lecture10.2
  Computation of Estimated Process Standard Deviation
• Lecture10.3
  Calculation of Process Capability Index

APPLICATION OF CALIBRATION TECHNIQUES IN MEASUREMENT SYSTEM   0/5

• Lecture11.1
  Measurement Error vs Measurement Uncertainty
• Lecture11.2
  Calibration System / Measurement Traceability
• Lecture11.3
  Major Categories of Calibration
• Lecture11.4
  Review and Discuss Certificate of Calibration
• Lecture11.5
  Determination of Calibration Interval

CLASS_ROOM ASSIGNMENT AND EXERCISES  0/1

• Lecture12.1
  Case Study: Impact of GR&R on Process Capability Studies