MEASUREMENT SYSTEM ASSESSMENT

Course Content

Total Training Hours: 14 hours
  • MAIN CONCEPT OF MEASUREMENT SYSTEM  0/6

    • Lecture1.1
      Introduction, Purpose and Terminology
    • Lecture1.2
      Quality of Measurement Data
    • Lecture1.3
      The Measurement Process
    • Lecture1.4
      Statistical Properties of Measurement Systems
    • Lecture1.5
      Standards: Background and Use of Standards
    • Lecture1.6
      Purpose of Calibration & Calibration Systems
  • TYPES OF MEASUREMENT SYSTEM VARIATION  0/6

    • Lecture2.1
      Source of Variations
    • Lecture2.2
      Bias
    • Lecture2.3
      Repeatability
    • Lecture2.4
      Reproducibility
    • Lecture2.5
      Stability
    • Lecture2.6
      Linearity
  • COMPUTATION TECHNIQUES ASSOCIATED WITH GR&R  0/0

  • ANALYSIS OF A MEASUREMENT SYSTEM  0/4

    • Lecture4.1
      Measurement System Discrimination
    • Lecture4.2
      Process Variation – Location
    • Lecture4.3
      Process Variation – Width or Spread
    • Lecture4.4
      Analysis of Measurement System’s Variability using Work Examples: Bias / Repeatability / Reproducibility / Stability / Linearity
  • EFFECTS OF MEASUREMENT SYSTEM VARIABILITY  0/7

    • Lecture5.1
      Effect on Decisions
    • Lecture5.2
      Effect on Product Decisions
    • Lecture5.3
      Effect on Process Decisions
    • Lecture5.4
      New Product Acceptance
    • Lecture5.5
      New Process Acceptance
    • Lecture5.6
      Process setup and control
    • Lecture5.7
      Effectiveness in establishing QC / QA Systems
  • ASSESSING MEASUREMENT SYSTEMS  0/3

    • Lecture6.1
      Background : Measurement System Overview
    • Lecture6.2
      Selecting and Developing Test Procedures
    • Lecture6.3
      Preparation for a Measurement System Study
  • VARIABLE MEASUREMENT SYSTEM STUDY  0/6

    • Lecture7.1
      Range Method (Rapid Approximation)
    • Lecture7.2
      Average and Range Method (XBar-R)
    • Lecture7.3
      Standard GR&R Study
    • Lecture7.4
      Analysis of Variance (ANOVA) Method
    • Lecture7.5
      Application of ANOVA using Computerised Software (e.g Minitab)
    • Lecture7.6
      Interpretation of ANOVA Result & Number of Distinct Categories
  • ATTRIBUTE MEASUREMENT SYSTEM STUDY  0/3

    • Lecture8.1
      Attribute Gage Study (Go/No Go Method)
    • Lecture8.2
      Visual Standard: Based on Percentage of Correct Decision
    • Lecture8.3
      Visual Standard: Based on “Inter-raters Agreement” In Terms of Cohen’s Kappa Value
  • METHOD OF REDUCING UNACCEPTABLE GR&R RESULT  0/0

  • APPLICATION OF CALIBRATION TECHNIQUES IN MEASUREMENT SYSTEM   0/5

    • Lecture10.1
      Measurement Error vs Measurement Uncertainty
    • Lecture10.2
      Calibration System / Measurement Traceability
    • Lecture10.3
      Major Categories of Calibration
    • Lecture10.4
      Review and Discuss Certificate of Calibration
    • Lecture10.5
      Determination of Calibration Interval
  • IMPACT OF GR&R ON PROCESS CAPABILITY STUDIES  0/3

    • Lecture11.1
      Determination of Calibration Interval
    • Lecture11.2
      Computation of Estimated Process Standard Deviation
    • Lecture11.3
      Calculation of Process Capability Index
  • CLASS_ROOM ASSIGNMENT AND EXERCISES  0/1

    • Lecture12.1
      Case Study: Impact of GR&R on Process Capability Studies