LEAN MANUFACTURING

Day 1: 9:00AM – 05:00PM MAIN CONCEPT OF MEASUREMENT SYSTEM  0/5

• Lecture1.1
  Measurement System Copy
• Lecture1.2
  Measurement / Tolerance Copy
• Lecture1.3
  Process In-Control Copy
• Lecture1.4
  Measurement System Analysis Copy
• Lecture1.5
  Gauge Capability Studies Copy

COMPUTATION TECHNIQUES ASSOCIATED WITH GR&R  0/1

• Lecture2.1
  Standard Deviation / Rbar / d2 / Ro / d2 Copy

TYPES OF MEASUREMENT SYSTEM VARIATION  0/1

• Lecture3.1
  Bias / Repeatability / Reproducibility / Stability / Linearity Copy

REPEATABILITY & REPRODUCIBILITY (R&R) / GAGE CAPABILITY  0/2

• Lecture4.1
  Computation of Combined GR&R using individual R & R Values Copy
• Lecture4.2
  Computation of Combined GR&R using Quick Approximation Method Copy

PROCEDURE FOR DETERMINING GR&R & % GR&R  0/0

DAY 2: 09:00AM - 05:00PM COMPUTATION OF %GR&R & ITS INTERPRETATION DURING APPLICATION   0/3

• Lecture6.1
  Calculation of GR&R Copy
• Lecture6.2
  Process Variation Copy
• Lecture6.3
  Percent of Tolerance Copy

USE OF GR &R DATA SHEET & GR&R REPORT FORMAT  0/2

• Lecture7.1
  GR&R Data Sheet Copy
• Lecture7.2
  GR&R Report Format Copy

PRACTICAL METHOD FOR REDUCING UNACCEPTABLE GR&R RESULT  0/2

• Lecture8.1
  Six Sigma Spread Copy
• Lecture8.2
  Determination of GR&R Reduction Percentage Copy

IMPACT OF GR&R ON PROCESS CAPABILITY STUDIES  0/2

• Lecture9.1
  Process Capability Studies coupled with GR&R Copy
• Lecture9.2
  Process Capability Studies with reduced GR&R Copy

APPLICATION OF CALLIBRATION TECHNIQUES IN MEASUREMENT SYSTEM  0/3

• Lecture10.1
  Physical Calibration Copy
• Lecture10.2
  Comparative Techniques Copy
• Lecture10.3
  Inter-laboratory Comparisons Copy

CLASS-ROOM ASSIGNMENT & EXERCISES  0/0