GR&R STUDIES (MEASUREMENT SYSTEM)

Course Content

Total Training Hours: 14 hours
  • Day 1: 9:00AM – 05:00PM MAIN CONCEPT OF MEASUREMENT SYSTEM  0/5

    • Lecture1.1
      Measurement System
    • Lecture1.2
      Measurement / Tolerance
    • Lecture1.3
      Process In-Control
    • Lecture1.4
      Measurement System Analysis
    • Lecture1.5
      Gauge Capability Studies
  • COMPUTATION TECHNIQUES ASSOCIATED WITH GR&R  0/1

    • Lecture2.1
      Standard Deviation / Rbar / d2 / Ro / d2
  • TYPES OF MEASUREMENT SYSTEM VARIATION  0/1

    • Lecture3.1
      Bias / Repeatability / Reproducibility / Stability / Linearity
  • REPEATABILITY & REPRODUCIBILITY (R&R) / GAGE CAPABILITY  0/2

    • Lecture4.1
      Computation of Combined GR&R using individual R & R Values
    • Lecture4.2
      Computation of Combined GR&R using Quick Approximation Method
  • PROCEDURE FOR DETERMINING GR&R & % GR&R  0/0

  • DAY 2: 09:00AM - 05:00PM COMPUTATION OF %GR&R & ITS INTERPRETATION DURING APPLICATION   0/3

    • Lecture6.1
      Calculation of GR&R
    • Lecture6.2
      Process Variation
    • Lecture6.3
      Percent of Tolerance
  • USE OF GR &R DATA SHEET & GR&R REPORT FORMAT  0/2

    • Lecture7.1
      GR&R Data Sheet
    • Lecture7.2
      GR&R Report Format
  • PRACTICAL METHOD FOR REDUCING UNACCEPTABLE GR&R RESULT  0/2

    • Lecture8.1
      Six Sigma Spread
    • Lecture8.2
      Determination of GR&R Reduction Percentage
  • IMPACT OF GR&R ON PROCESS CAPABILITY STUDIES  0/2

    • Lecture9.1
      Process Capability Studies coupled with GR&R
    • Lecture9.2
      Process Capability Studies with reduced GR&R
  • APPLICATION OF CALLIBRATION TECHNIQUES IN MEASUREMENT SYSTEM  0/3

    • Lecture10.1
      Physical Calibration
    • Lecture10.2
      Comparative Techniques
    • Lecture10.3
      Inter-laboratory Comparisons
  • CLASS-ROOM ASSIGNMENT & EXERCISES  0/0

This content is protected, please login and enroll course to view this content!