Aerospace Series : AS9145 (2016) – Requirements for Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) Training

Course Content

Total Training Hours: 2 days

  • DAY ONE : Interpretation and Application of APQP   0/5

    • Lecture1.1
      • Introduction
    • Lecture1.2
      • Scope
    • Lecture1.3
      • Terms and Definition
    • Lecture1.4
      • Advanced Product Quality Planning Requirements – ▪ General Requirements ▪ Advanced Product Quality Planning Project Management ▪ Phase 1 Requirements – Planning ▪ Phase 2 Requirements – Product Design and Development ▪ Phase 3 Requirements – Process Design and Development ▪ Phase 4 Requirements – Product and Process Validation ▪ Phase 5 Requirements – On-going Production, Use, and Post-Delivery Service.
    • Lecture1.5
      • Class-room Assignments & Discussion – ▪ Review, Develop and Discuss APQP-Table 1: Acceptance Criteria for Process Capability Studies (E.g. Pp, PpK, Cp, CpK) ▪ Review, Develop and Discuss Table B1 (Phase 1) / B2 (Phase 2) / B3 (Phase 3)

  • DAY TWO : Interpretation and Application of PPAP   0/4

    • Lecture2.1
      • Production Part Approval Process (PPAP) Requirements
    • Lecture2.2
      ▪ Process Requirements for Production Part Approval Process (PPAP) ▪ Production Part Approval Process (PPAP) File and Submission ▪ Production Part Approval Process (PPAP) Disposition – Production Part Approval Process Submission Disposition – Recording the Production Part Approval Process Disposition ▪ Production Part Approval Process (PPAP) Re-submission
    • Lecture2.3
      • Class-room Assignments & Discussion
    • Lecture2.4
      ▪ Conduct Measurement System Analysis: GR&R Studies & Determination of ndc value. ▪ Review, Develop and Discuss PPAP-Table 2: Production Part Approval Process File Contents (E.g. Process Flow Diagram, PFMEA, Control Plan & etc.) ▪ Review, Develop and Discuss Table B4 (Phase 4) / B5 (Phase 5)
This content is protected, please login and enroll course to view this content!