Course Content
-
DAY ONE : Interpretation and Application of APQP
-
• Introduction
-
• Scope
-
• Terms and Definition
-
• Advanced Product Quality Planning Requirements – ▪ General Requirements ▪ Advanced Product Quality Planning Project Management ▪ Phase 1 Requirements – Planning ▪ Phase 2 Requirements – Product Design and Development ▪ Phase 3 Requirements – Process Design and Development ▪ Phase 4 Requirements – Product and Process Validation ▪ Phase 5 Requirements – On-going Production, Use, and Post-Delivery Service.
-
• Class-room Assignments & Discussion – ▪ Review, Develop and Discuss APQP-Table 1: Acceptance Criteria for Process Capability Studies (E.g. Pp, PpK, Cp, CpK) ▪ Review, Develop and Discuss Table B1 (Phase 1) / B2 (Phase 2) / B3 (Phase 3)
-
-
DAY TWO : Interpretation and Application of PPAP
-
• Production Part Approval Process (PPAP) Requirements
-
▪ Process Requirements for Production Part Approval Process (PPAP) ▪ Production Part Approval Process (PPAP) File and Submission ▪ Production Part Approval Process (PPAP) Disposition – Production Part Approval Process Submission Disposition – Recording the Production Part Approval Process Disposition ▪ Production Part Approval Process (PPAP) Re-submission
-
• Class-room Assignments & Discussion
-
▪ Conduct Measurement System Analysis: GR&R Studies & Determination of ndc value. ▪ Review, Develop and Discuss PPAP-Table 2: Production Part Approval Process File Contents (E.g. Process Flow Diagram, PFMEA, Control Plan & etc.) ▪ Review, Develop and Discuss Table B4 (Phase 4) / B5 (Phase 5)
-